Alerts and Reminders

---

1. The Alerts icon will appear in the upper left of the active home screen when there is an active alert or notification. Touch the ALERTS icon to view active Alerts & Reminders.

2. Touch the alert or reminder heading to see more information about the alert.

3. Acknowledge the alert or reminder. Reminders will allow you to reset the timer. Less critical Alerts and notifications may allow options to snooze or dismiss.

   

---

IAQ Reminders

You can set up IAQ reminders in the thermostat to remind users when filters, pads, bulbs, etc. need cleaning or replacement. The available reminders vary based on the ISU settings. For example, if the thermostat is configured to control a flow through humidifier, it will have the humidifier pad reminder but not the humidifier tank reminder:

• Air Filter 1

• Air Filter 2

• Electronic Air Cleaner Pre-Filter

• Electronic Air Cleaner Post-Filter

• Humidifier Tank/Water Filter

• Humidifier Pad

• Dehumidifier Filter

• Ventilator Core

• Ventilator Filter

• UV Bulb 1

• UV Bulb 2

Reminders that are displayed under preferences will change based on the IAQ equipment installed. Reminders for equipment that is already set up can be set using the steps below. Reminders for IAQ equipment that is not yet set up must be turned on from the Installer setup.

To access or adjust the reminder settings

• Select the Menu icon.

• Scroll to and select Preferences > Reminder Settings.

• Select the reminder you want to set from the list (shown above).

• Touch 5or 6to set timer length. Ranges, increments and units will change based on the reminder.

• Touch Save to save the reminder.

• Touch Reset Timer when you have completed the recommended maintenance or you can extend the timer setting to turn off the alert and remind you later to do the recommended maintenance.

• Repeat these steps for all reminders you want to set